Metra 95-9700WR Instrucciones De Instalación

KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws • D) (4) #10-32 x 1/2" Phillips steel machine screws
• E) Axxess interface (not shown) • F) ASWC-1 interface (not shown)
A
The World's best kits.
®
Harley-Davidson Street Glide, Electra Glide,
Ultra, and Limited Models 2014-Up† /
Road Glide 2015-Up†
†
Non-amplified models only
Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision*
• Axxess interface in water resistant enclosure included
• ASWC-1 in water resistant enclosure included, to retain handlebar controls
• Antenna adapter included
* This kit can only be used with an ISO DDIN radio that has an "L" shaped chassis
B C
MetraOnline.com
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
design, with the radio chassis at the top of the screen. At present only the Sony
XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this design.
D
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
95-9700WR
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Fairing Disassembly
– Harley Davidson Street Glide, Electra Glide,
Ultra, and Limited models 2014-up .............2-3
– Harley Davidson Road Glide 2015-up..............4
Kit Assembly ..........................................................5
Final Assembly .......................................................8
Axxess Interface Installation .............................6-11
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Axxess interface and harness included
Antenna Adapter: Included
Steering wheel control interface: Included
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers • Allen wrenches
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 9/10/20 INST95-9700WR