Publicidad
Idiomas disponibles
Idiomas disponibles
Dual Assignment (long button press)
The ASWC-1 has the capability to assign two functions to a single button, except Volume-Up
and Volume-Down. Follow the steps below to program the button(s) to your liking.
Note: Seek-Up and Seek-Down come programmed as Preset-Up and Preset-Down for a
long button press.
1. Turn on the ignition but do not start the vehicle.
2. Press and hold down the handlebar control button that you want to assign a long press
function to, for ten seconds, or until the L.E.D. flashes rapidly. At this point release the
button; the L.E.D. will then go solid.
3. Press and release the Volume-Up button the number of times corresponding to the new
button number selected. Refer to the Dual Assignment Legend. The L.E.D. will flash rapidly
while the Volume-Up button is being pressed, and then go back to a solid L.E.D. once
released. Go to the next step once the Volume-Up button has been pressed the desired
number of times.
Caution: If more than ten seconds elapses between pressing the Volume-Up button, this
process will abort, and the L.E.D. will go out.
4. To store the long press button in memory, press the button that you assigned a long press
button to (the button held down in Step 2). The L.E.D. will now go off indicating the new
information has been stored.
Note: These steps must be repeated for each button you would like to assign a dual purpose
feature to. To reset a button back to its default state, repeat Step 1, and then press the Volume-
Down button. The L.E.D. will go off, and the long press mapping for that button will be erased.
HANDLEBAR CONTROL SETTINGS
(CONT)
Dual assignment legend
1 - Not allowed
2 - Not allowed
3 - Seek-Up/Next
4 - Seek-Down/Prev
5 - Mode/Source
6 - ATT/Mute
7 - Preset-Up
8 - Preset-Down
9 - Power
* Not applicable in this application
UPDATING THE 95-9700WR
• Download and install the Axxess Updater from axxessinterfaces.com.
• Connect the USB-MINI-CAB update cable (sold separately) between the Axxess interface included
with the 95-9700WR and the computer.
• From the Start Menu of the computer, click on on "All Programs", then "Axxess Updater".
• Press "Update Firmware" on both pages. The software will begin to download at this point.
Note: Please note which firmware downloaded to the interface. This will help in
troubleshooting, if need be.
10 - Band
11 - Play/Enter
12 - PTT
13 - On-Hook
14 - Off-Hook
15 - Fan-Up *
16 - Fan-Down *
17 - Temp-Up *
18 - Temp-Down *
REV. 9/10/2020 INST95-9700WR
11
Publicidad
