Metra 95-9700WR Instrucciones De Instalación página 5

1. Secure the radio brackets to the radio
housing with (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Slide the radio into the radio housing
assembly and secure with screws supplied
with the radio. (Figure B)
3.
Secure the radio housing assembly to the bike
using (4) 3/16 Allen screws previously removed
in step 8 of disassembly. (Figure C)
4. a. For the Street Glide, Electra Glide,
Ultra, and Limited models 2014-up:
Attach the radio bracket removed in step 6 of
disassembly to the top of the radio housing
assembly, and secure with (4) #10-32 x 1/2"
Phillips steel machine screws supplied.
b. For the Road Glide 2015-up:
Attach the fairing bracket removed in step
10 of disassembly to the top of the radio
housing assembly, and secure with (4)
#10-32 x 1/2" Phillips steel machine screws
supplied. Ensure the bracket is far forward,
and the curved portion is facing the rear of
the bike as mentioned in disassembly.
Continue to Axxess Interface Installation
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REV. 9/10/2020 INST95-9700WR
5