Zeegma Zonder Pro Compact Manual De Usuario página 9

LIST OF PARTS (fig. A)
1. Flexible hose
2. Chrome-plated telescopic tube
3. Upper body
4. Inlet hole
5. Body base
6. Front wheels
7. Rear wheels
8. Tank
9. Plastic clamps
10. On/off switch
11. Transport handle
MOUNTING
1. Mount the front and rear wheels (fig. 1).
2. Insert a flexible hose into the inlet hole (fig. 2). Make sure it is tightly attached.
3. Attach the telescopic tube and the selected nozzle to the hose (fig. 3).
USE
1. To use the vacuum cleaner in the blowing function, insert the flexible hose into
the outlet hole (fig. 4).
2. To use the vacuum cleaner to clean dust, dirt and other dry debris, place the bag
inside the vacuum cleaner over the mouth of the inlet hole (fig. 6), and then place
the HEPA filter on the filter support (fig. 7).
3. Put a universal cap (12, fig. A) on the telescopic tube.
4. Connect the power cord to the power source, and then turn on the vacuum
cleaner by pressing the switch (fig. 8).
VACUUMING LIQUIDS AND WET FLOORS
1. To use the vacuum cleaner to clean spills and leaks, place the sponge filter on
the filter support (fig. 5).
2. Connect the power cord to the power source, and then turn on the vacuum
cleaner by pressing the switch (fig. 8).
WASHING OF UPHOLSTERY AND CARPETS
1. Place the sponge filter on the filter support (fig. 5).
2. Place the selected nozzle on the telescopic tube - the upholstery washing nozzle
(19, fig. A) or the carpet and rug washing nozzle (20, fig. A).
3. Clean/wash the upholstery, carpet or rug using the appropriate detergents as
recommended by the manufacturer of the surface to be cleaned.
4. Connect the power cord to the power source, and then turn on the vacuum
cleaner by pressing the switch (fig. 8).
12. Universal cap
13. Outlet hole
14. Power cord
15. Sponge filter
16. HEPA filter
17. Dry vacuum bag
18. Crevice nozzle
19. Upholstery washing nozzle
20. Carpet and rug washing nozzle
21. Filter support
EN