Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Wall Panel H Installation
b.
Drill a pilot hole (using 1/8" drill bit) in front lower corner at
location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
a.
H
c.
H
Using a screwdriver, punch out the screw holes on the top
of Front Right Side (H) 2 places.
H
Snap Front Right Side (H) into Front Floor (A).
Hold Front Right Side (H) upright to prevent it from
falling (until Right Back (F) is installed).
H
click
ALIGN
A
Screw Holes
ALIGN
7
Publicidad
