Publicidad
Technical Data
Weight Without Accessories
Air Consumption
Air Input Connection
Recommended Diameter
CAUTION
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use
of too long hoses (more than 26.2 ft). The hose minimum inside diameter shall be 3/8" and the connectors shall be
1/4 NPT. Use the right size and good quality couplers and accessories.
Filtering and Lubrication Requirements
CAUTION
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential flaws with the tool.
We recommend installing a
lubrication reducing 80 % oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool.
Consult the air compressor instructions.
Air
Compressor
Code
Description
Piston Diameter
Air Exhaust
Noise Level
Vibration
Free Speed
Total Length
Air Pressure
Hose Minimum
Brand UNI-LL-1/4 centralized filter-oil feeder system. This system assures
UNI-LL-1/4
Centralized
Feeder System
3 500 strokes / min
Air Hose
Filter-Oil
TPN-711
19383
Air Hammer
3/4"
Front
114 dB
< 2.5 m/s
2
3,4 lb
7 3/4"
90 PSI
3 CFM
1/4 NPT
3/8"
Adapter (not
included)
ENGLISH
3
Publicidad
