Publicidad
Idiomas disponibles
Idiomas disponibles
BM 2610957386 04-09:BM BNS200-18 04-09 6/17/09 7:55 AM Page 12
Maintenance performed by unauthorized
W RNING
personnel may result in misplacing of the
internal components which could cause serious hazard.
We recommend that all tool service be performed by a
BOSCH factory service center or authorized BOSCH
service station.
Contact your BOSCH service center for instructions and the
following user replaceable parts; o-rings, bumpers, and
driver blades.
For all other repairs contact your BOSCH service center.
When cleaning a tool be careful not to
W RNING
disassemble any portion of the tool since
internal components may be misplaced or safety
components may be improperly mounted. Certain
cleaning agents such as gasoline, carbon tetrachloride,
ammonia, etc. may damage plastic parts and o-rings.
Do not attempt to clean by inserting
W RNING
pointed objects through openings. Sharp
edges may damage internal components causing a serious
hazard.
Ventilation openings, the work contact element, and the
trigger must be kept clean and free of foreign matter.
Periodically clean the tool with compressed air.
Clean the magazine. Remove metal or wooden chips which
may have accumulated in the magazine. Periodically clean
magazine with compressed air.
When not in use, the tool should be disconnected and
stored in the storage case in a warm and dry place. When
tool will not be in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
Do not store the tool in a cold weather environment.
Keep out of reach of children and
W RNING
personnel unfamiliar with tool operation.
Lock the storage area. Tools are dangerous in the hands of
personnel unfamiliar with the tool.
Maintenance
Service
Cleaning
Storage
ACTION
WHY
Drain air line filter
Prevent
daily.
accumulation of
moisture
and dirt.
Keep lubricator
Keep the Nailer
filled
lubricated
Clean filter element
Prevent clogging
- then blow air
of filter with dirt.
through filter in
direction opposite
to normal flow.
Clean magazine
Prevent a jam.
and feeder
Keep work contact
Promote operator
element working
safety and efficient
properly
tool operation.
Lubricate the tool.
Extend tool life.
Drain air
Keep water out of
compressor.
tool.
12
HOW
Open manual
valve.
Fill with BOSCH
pneumatic tool
lubricant.
Follow
manufacturer's
instructions.
Blow mechanism
clean daily.
Blow clean daily.
Place 2-3 drops of
lubricant
into the tool as
directed.
Open valve on air
compressor tank.
Publicidad
