Publicidad
Idiomas disponibles
Idiomas disponibles
DEHUMIDIFICATION
Switch on the device with the „F" button.
Press the „E" button once - dehumidification is indicated by the
The display „G" shows the „dh" symbol.
The humidity level is constant - it cannot be changed.
The fan operates only at „F1" speed.
To switch off, press the „E" button (change of operating mode) or the „F" button (switching
off the device).
When using the dehumidification mode, the pipe discharging the air to the outside must
be connected to the unit to allow moisture to be removed.
FAN
In this mode, only the fan of the device works.
Switch on the device with the „F" button.
Press the „E" button – activation of the function is indicated by the
The „FA" symbol appears on the „G" display.
The fan speed (<F1>, <F2>) is set by pressing the „D" button.
To switch off, press the „E" button (change of operating mode) or the „F" button (switching
off the device).
SLEEP
The night mode is activated by pressing the „H" button (REMOTE CONTROL).
Activation of the function is indicated by the
The display „G" shows the pre-set temperature.
The fan operates only at <F1> speed.
To switch off, press the „H" button.
START DELAY
The device must be switched off, but connected to the power supply.
Press the „A" button - the digits on the „G" display will start blinking.
Select the desired operating mode (see above).
Using the „B" and „C" buttons, select the time within the range 1 to 24 hours.
After selecting the time, wait until the digits on the display stop blinking.
Activation of the function is indicated by the HR indicator light.
To deactivate the function, press the „A" button twice.
TIMER
Switch on the device with the „F" button.
Select the desired operating mode (see above).
Press the „A" button - the digits on the „G" display will start blinking.
Using the „B" and „C" buttons, select the time within the range 1 to 24 hours.
After selecting the time, wait until the digits on the display stop blinking.
Activation of the function is indicated by the HR indicator light.
To deactivate the function, press the „A" button twice.
It is possible to change the operating mode when the „TIMER" function is active.
•
22
EN
indicator light.
indicator light.
indicator light.
Publicidad
