Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The air conditioner does not
function.
The air conditioner restart
frequently
The unit is too noisy
No work of compressor.
Cautions: Switch off the unit and unplug it immediately if anything abnormal happens.
Then contact a qualified electrician.
Above data without advance notice for product improvement
TECHNICAL DATA
Power supply
Cooling medium
Cooling efficiency
Power consumption
Maximum allowed overpressure
Maksymalne dopuszczalne ciśnienie
Air flow
Fuse parameters of the machine
Type: 5ET or SMT Voltage: 250V Current: 3.15 A
Addendum
Schematic diagram of the air-conditioning system (Refer to the nameplate on the product
for the detailed technical parameters)
•
24
EN
Cause
No power supply.
flashes on the display screen
In direct sunlight
Windows or doors open, many
people or a heat source in the
room.
Dirty filter
Air inlet or air outlet blocked
Unit stands uneven.
Self protect of compressor
suction
pumping
Solution
Connect to power supply outlet
and switch on
Drain water
Close curtains.
Close doors and windows, remove
the heat source
Clean or replace the filter(s).
Remove the blockage
Place on an even, solid surface
(less vibration).
Wait for 3 minute and restart
again after the descend of
temperature
220-240V~ 50Hz
R290/130g
7000Btu(2.06KW)
792W
0.6MPa
1.8MPa
3.0MPa
300m³/h
Publicidad
