Changing The Sound And Display Settings; Menu - Sony CDX-RW300 Manual De Instrucciones

Changing the sound and
display settings

— Menu

The following items can be set:
Set up
• REAR/SUB* — to switch the audio output
REAR or SUB.
– Select "REAR" to output to a power
amplifier.
– Select "SUB" to output to a subwoofer.
• DEMO* — to turn the demonstration display
on or off.
– Select "ON" to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select "OFF" to deactivate the
demonstration display.
• BEEP — to turn the beeps on or off.
• DIM — to change the brightness of the display.
– Select "ON" to dim the display.
– Select "OFF" to deactivate the Dimmer.
Switching the REAR/SUB
Press (SEL) and then press the
volume + (REAR) or – (SUB) button.
After 3 seconds, the display returns to normal
play mode.
Selecting the desired item
Press (SEL) and the desired button
simultaneously.
(SEL) + (4): DEMO*
(SEL) + (6): BEEP
(SEL) + (DSPL): DIM
After the mode setting is completed, the display
returns to normal play mode.
To cancel the item, press (SEL) and the desired
button simultaneously again.
* When the unit is turned off.
*
13