Sound Adjustment; Selecting The Sound Quality - Eq7; Customizing The Equalizer Curve - Eq7 Tune; Adjusting The Sound Characteristics - Sony XAV-64BT Manual De Instrucciones

Ocultar thumbs Ver también para XAV-64BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Sound Adjustment

Selecting the sound quality
— EQ7
You can select an equalizer curve from 7 music
types ("Xplod," "Vocal," "Edge," "Cruise,"
"Space," "Gravity," "Custom," or "OFF").
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "EQ7."
The options appear.
4
Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select "OFF."
To return to the previous display, touch "Back."
Customizing the equalizer curve
— EQ7 Tune
The EQ7 "Custom" curve allows you to make
your own equalizer settings. You can adjust the
level of 7 different bands: 63 Hz, 160 Hz,
400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound," then "EQ7."
3
Touch "Custom," then "Tune."
The tuning display appears.
Back
ATT
EQ7 Tune : Custom
0
0
63 Hz
160 Hz
400 Hz
Reset
4
Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch "Reset."
5
Touch "OK."
The setting is complete.
To return to the previous display, touch "Back."
38
.
.
Top
0
0
0
0
0
1 kHz
2.5 kHz
6.3 kHz
16 kHz
OK
Tip
Other equalizer types are also adjustable.
Adjusting the sound
characteristics
The sound balance between left and right
speakers ("Balance") and front and rear speakers
("Fader") can be adjusted to your preference.
You can also adjust the volume level of the
subwoofer if it is connected.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "Balance/Fader."
The setting display appears.
Back
ATT
Balance/Fader/Subwoofer Level Adjust
4
Touch B/V/v/b to adjust the balance/
fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).
5
Touch +/– to adjust the volume level of
the subwoofer.
This setting is adjustable only when a
subwoofer is connected and "Rear/Sub Out"
is set to "Sub" (page 47).
The level is adjustable in single steps,
between –6 and +6.
To return to the previous display, touch "Back."
.
Top
0
Subwoofer
Fader : 0
Balance : 0

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xav-63

Tabla de contenido