Publicidad
Idiomas disponibles
Idiomas disponibles
The Reverse switch is located
on the top of the
housing. Slide the switch to the Left for warm weather
operation. Slide the switch to the Right for cool
weather operation. (Fig. 18)
NOTE: Wait for fan to stop before changing the
setting of the slide switch.
Speed settings for warm or cool weather depend on
factors such as the room size, ceiling height, number of
fans, etc.
Warm weather - (Forward) A downward air flow
creates a cooling effect as shown in Figure 19. This
allows you to set your air conditioner on a higher
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves
warm air off the ceiling area as shown in Figure 20.
This allows you to set your heating unit on a lower
setting without affecting your comfort.
motor
Figure 1 9
Figure 2 0
Figure 18
8.
Publicidad
