Dometic WAECO CoolFun TD26 Instrucciones De Uso página 20

Operation
6.1 Energy saving tips
 Choose a well ventilated installation location which is protected against
direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
6.2 Using the cooler
NOTICE! Risk of damage
A
 Ensure that the objects or goods placed in the cooling device
are suitable for cooling or warming to the selected temperature.
 Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze and
can therefore destroy glass containers.
 Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 5 1, page 4) into the cigarette
lighter socket or a 12 V socket in the vehicle (fig. 2, page 3)
or
➤ Connect the 220-240 V connection cable (fig. 5 2, page 4) to the
220–240 V AC mains supply.
➤ Push the ECO switch (fig. 4 H, page 4) to the required position
✓ The cooler starts to cool or heat the interior space.
➤ When you stop using the cooler, set the switch to "OFF" and disconnect
it from the mains.
6.3 Connecting to the cigarette lighter
I NOTE
If you connect the cooler to the cigarette lighter, remember that the
ignition must be turned on to supply it with power.
20
CoolFun TD26
EN