Clarke American Sanders 07057A Manual Del Operador página 6

ENGLISH
EN
How to Transport the Machine
Transporting the Machine With Limited
Cargo Area:
To transport the machine, follow this procedure:
1. Lower sanding drum with control lever. See
fi gure #1.
2. Slide collar beyond overlap of control link;
remove pin from notch. See fi gure #2.
3. Twist and remove handle pigtail from motor
cord. See fi gure #3.
4. Release handle latches and remove handle
from chassis. See fi gure # 2.
5. Remove dust pipe from chassis.
6. Lift chassis with transport handles and place in
cargo area. See fi gure # 4.
WARNING:Machine is heavy (95 lbs.).
To avoid injury or damage
grasp transport handles fi rmly;
use proper lifting technique.
7. Secure chassis to prevent movement in cargo
area. Place handle and dust pipe in cargo area.
Figure # 4
-6- Form No. 78425C
Figure # 1
Figure # 2
Figure # 3
®
American Sanders Operator's Manual (EN) - EZ-8 Sander
Clarke