How To Use As An Upright Vacuum; How To Use As A Hand Held Vacuum - Easy Home EV-630 Manual Del Usuario

How to use as an upright stick vacuum
and unplugged during assembly. Once the stick vacuum
is assembled, make sure the HEPA fi lter
protection fi lter
1. Plug the power cord into a power outlet.
2. Push the power switch
3. Pull the power switch
4. Unplug the power cord after each use.

How to use as a hand held vacuum

unplugged during disassembly. Once the stick vacuum is
disassembled, make sure the HEPA fi lter
protection fi lter
1. Make sure the power cord is unwound. Therefore, turn the power
cord hook
2. Push the handle release button
5
handle
3. Gently pull on the fl oor head
collection box
4a. Insert the crevice head
collection box.
4b. Insert the suction brush adapter
the dust collection box. Than attach the suction brush
adapter.
5. Push the power switch
6. Pull the power switch
7. Unplug the power cord after each use.
Make sure the stick vacuum is turned off
15 are in place.
2
Make sure the stick vacuum is turned off and
15 are in place.
6
downwards and pull the cord out of the clamp
.
17
.
11
2
2
2 down to turn the vacuum ON.
up to turn the vacuum OFF.
3
and slowly pull out the
9
to remove it from the dust
into the air inlet hole
12
into the air inlet hole on
down to turn the vacuum ON.
up to turn the vacuum OFF.
Getting started
16 and the motor
16 and the motor
18
on the dust
7
.
13
to the
11