Conceptronic CMED3PRO Manual De Instrucciones página 28

ENGLISH
Note: Most Video Codec's are supported on the CMED3PRO (Like XviD, AVI, MPEG2, etc.) but it is
possible that you have files that require a Codec, which is not included with the CMED3PRO.
If you try to playback a file with a not supported Codec, you will see the message "CODEC
NOT SUPPORTED".
DVD Playback
The CMED3PRO plays DVD's from the hard disk as if they are a normal DVD. You can navigate
through the DVD Menu, choose subtitles, change audio languages, etc.
Folder Setup
To play DVD's from your Harddisk, you need to setup the DVD folders on the CMED3PRO
correctly.
Create a folder on the CMED3PRO Harddisk with the name of the DVD (i.e. "My Movie")
Copy the VIDEO_TS Folder from your DVD to the created DVD folder on the CMED3PRO Harddisk.
After copy is finished, it should look like below:
Disconnect the CMED3PRO from your computer and connect it to your TV. Turn on the
CMED3PRO.
Play the DVD
Select the "File" button in the 'Selection Menu', or press the "File" Button on the Remote
Control. The Media Player will open the File Browser Menu.
Use the navigation keys on the remote control to select the folder of your DVD in the menu (In
the example: My Movie).
Press the PLAY/PAUSE button on the remote control to start the playback of the DVD.
Note: Don't use the
files/subfolders and does not start DVD Playback.
Use the / / / navigation buttons and the
Use the / STOP button to end DVD Playback.
/ ENTER button in the CMED3PRO Menu. This will only show the
28
/ ENTER button to navigate in the DVD Menu.