Publicidad
Idiomas disponibles
Idiomas disponibles
Service
• Tool service must be performed only by the MATCO
authorized service centers listed . Service or maintenance
performed by unqualified personnel may result in a risk of
injury . Repair by unqualified personnel, use of unauthorized
parts, and failure to follow maintenance instructions may
create a risk of shock or injury .
SAVE THESE INSTRUCTIONS!
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product replace strict
adherence to cordless product safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious personal
injury.
• Hold tool by insulated gripping surfaces when performing an
operation where the accessories may contact hidden wiring .
Contact with a "live" wire will also make exposed metal parts of
the tool "live" and shock the operator .
OPERATING INSTRUCTION
Installing Or Removing Battery Pack
1 . Your new battery pack is not fully charged . You may need to
charge before use .
2 . Make sure the gresae gun is off when installing or removing
a battery .
3 . To remove a battery pack, depress both tabs on either side of
the battery and pull downward .
4 . To insert a battery pack, align the battery with the tool
housing and push battery inward until click indicating battery
is fully installed .
Charging The Battery Pack
1 . Battery may not charge when it is above a certain preset
temperature limit . Allow temperature of battery to cool before
charging .
2 . The charge process will take less than one hour .
3 . After charging, unplug the charger from the power source
and stow away in a safe place .
Tool Operation
1 . The grease gun can reach 6,000PSIG during operation .
Ensure the hose is free of kinks and damage .
2 . Use suction filling method or insert cartridge into the
container tube and screw onto the main unit .
3 . Make sure to remove the air pocket by continuing to hold the
trigger switch while pressing/releasing the air vent valve until
trapped air is removed .
4 . Pressure relieve valve is preset at 6000PSIG or 414 bar . It will
bypass grease output when there is a blocked lubricant line
or clogged bearing .
MCL16GG
MCL16GG 16V GREASE GUN
3
• Be aware that this tool is always in operating condition, because it
does not have to be plugged into an electrical outlet .
• Always be sure you have firm footing .
• Be sure no one is below when using the tool in high locations .
• Hold the tool firmly and use both hands .
• Do not leave the tool running . Do not force tool to stay in the "on"
position . Operate the tool only when hand-held .
• Some material contains chemicals which may be toxic . Take
caution to prevent working dust inhalation and skin contact .
Follow material supplier safety data .
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
07/28/16
Publicidad
