Setup; Installation / Assembly - Invacare Aquatec Pure Bidet Manual Del Usuario

4 Setup

4.1 Installation / Assembly

Assembling the shower toilet
The Aquatec® Pure Bidet fits standard and norm-WC's.
WARNING!
– Check all the accessory parts are in place.
– Do not connect the power until installation is finalized.
The shower toilet is suitable for all types of water supply
connection with a flushing cistern (top, bottom, sideways).
If the T-valve does not fit onto the water supply, adapter
pieces are necessary.
1590625-A
C
B
1. Unfasten the fixation nuts B of the existing toilet seat A
underneath the toilet bowl.
2. Remove the toilet seat and keep it with the fixation parts B
and C for later use.
A
Close the shut off valve A clockwise.
1.
2. Drain toilet water tank completely by flushing.
Setup
A
11