Invacare Aquatec Pure Bidet Manual Del Usuario página 12

Aquatec® Pure Bidet
A
C
B
1. Detach the water supply hose A on the part of the shut off
valve B.
Mount the T-valve C between shut off valve and water supply
2.
hose.
If part A is a rigid pipe, it must be replaced by a flexible hose.
12
A
B
Press lever A to detach the holder plate B from the bidet.
1.
A
1. Insert the supplied packing nuts A into the fixing holes on the
toilet bowl.
One pair of standard packing nuts with a diameter of 14 mm
are included in the package as an accessory part. If the fixing
hole diameter on the toilet bowl is less than 14 mm other
suitable packing nuts and washers need to be used.
1590625-A