Disassembly - Invacare Aquatec Pure Bidet Manual Del Usuario

Aquatec® Pure Bidet
1. Place one hand on the seat sensor A.
2. With the other hand press "CLEANSING / STOP" on the unit
control panel B or "CLEANSING" or "BIDET" on the remote
control.
•
Water sprays out of the nozzle. Cover the nozzle with your
free hand C to prevent water spattering out.

4.4 Disassembly

Follow the below instructions if in need of detaching the unit for
removal.
1. Disconnect the power plug.
2. Close the water supply by turning the shut off valve clockwise.
3. Drain the toilet water tank completely by flushing.
4. Disconnect the PVC flexible hose from the T-valve.
16
5. Lift the device slightly and pull it forwards out of the holder.
A
Unfasten the drain plug A underneath the unit and drain the
6.
water completely out of the water tank.
7. Disconnect the PVC flexible hose and T-valve.
8. Connect the water-supply hose from the water tank to the shut
off valve.
9. Open the shut off valve by turning counterclockwise.
10. Check the connections for any leakages, tighten if necessary.
11. Reinstall the original seat and lid to the toilet.
1590625-A