Manuales relacionados para Sanus BLF213
Resumen de contenidos para Sanus BLF213
- Página 1 GET IT RIGHT THE FIRST TIME Follow this step-by-step BLF 213 instruction manual to speed up your installation. INSTRUCTION MANUAL...
- Página 2 Our US-based install experts shows how easy this DIY HeightFinder™ shows you are standing by to help. project will be? where to drill. Call us at: 800-359-5520 Watch it now at: Check it out at: SANUS.com/2525 SANUS.com/1172 Or, chat at: SANUS.com/chatSP...
- Página 3 Does your TV No — Perfect! (including accessories) 125 lbs. weigh MORE than Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (56.6 kg) 125 lbs. (56.6 kg)? 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your...
- Página 4 Before you begin Don’t stress out Remove the stand Install any accessories when you see from your TV — if attached. you may have purchased — if they all the hardware included. require the TV to be removed from the Extra TV screw sizes and lengths wall for assembly.
- Página 5 Step-by-Step illustrations Read ALL CAUTION Protect the face warnings. of your TV speed up your installation. when laying it down for installation. These are IMPORTANT! Don’t get it? Read the detailed explanation below each step. CAUTION: ASSEMBLE Avoid potential Soft clean surface Read Important Stuff read read rea Must Read read read read read read Read read read Safety First read re...
- Página 6 STEP 1 Attach TV Bracket to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 7 1.1 Select TV Screws 1.2 Spacer Determination TV Bracket TV Bracket Flat Back Cable Interference Round Back Inset Holes TV Bracket TV Bracket TV Bracket Too Short Correct Too Long For flat-back TVs, no For rounded-back TVs, cable interference or CAUTION: inset holes, spacers spacers...
- Página 8 1.3 Assemble TV Bracket LOOSEN ADJUST TO FIT TV Adjust TV bracket to line up with your TV's mounting hole pattern. Loosen the two lower fasteners enough to slide the outer columns on TV bracket . (Indicated with arrows).
- Página 9 CENTER TIGHTEN CAUTION: Avoid potential personal injury or property damage! Do not overtighten the fasteners. Tighten only until snug. Be sure the center column is evenly spaced between the outer columns. Tighten the two lower fasteners, and verify the two middle lower/ upper fasteners are tightened.
- Página 10 1.4 Attach TV Bracket Assembly to TV POSITION SECURELY TIGHTEN f T V T o p o Rounded-back TVs / Extra Space Flat-back TVs 11 12 13 Install using the spacer, screw and washer combination you Center the TV bracket over your TV hole pattern as shown, selected for your TV.
- Página 11 STEP 2 Attach Wall Plate to Wall WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 12 STEP 2A Wood Stud Installation CAUTION: Avoid potential Min. 1 ½ in. (3.8 cm) personal injury or property damage! ● Drywall covering the wall Min. 16 in. (40.6 cm) Min. 3 ½ in. (8.9 cm) must not exceed 5/8 in. (1.5 cm) ●...
- Página 13 HeightFinder™ sanus.com /1172 To calculate your precise wall plate location, check out TIP: our HeightFinder at sanus.com [www.sanus.com/1172]. Remove wall plate covers by pushing the outer edge inward, Place the wall plate template at your desired height and position while pulling the cover forward.
- Página 14 STEP 2A (continued) DRILL SECURELY TIGHTEN 3 ½ in. (8.9 cm) 7/32 in. (5.5 mm) CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is CAUTION: Be sure you drill into the CENTER of the stud.
- Página 15 STEP 2B Solid Concrete or Concrete Block Installation CAUTION: REMOVE COVERS Avoid potential personal injury or property damage! ● Mount the wall plate directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (20.3 cm) ● Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm) ●...
- Página 16 TIP: Never drill into the mortar between blocks. Never drill into the mortar between blocks. our HeightFinder at sanus.com [www.sanus.com/1172]. Position the wall plate template on the wall at your desired height. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
- Página 17 INSERT ANCHORS SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent Be sure the anchors are seated fl ush unwanted movement of the wall plate . Ensure the wall plate is CAUTION: CAUTION: with the concrete surface.
- Página 18 STEP 3 Attach TV to Wall Plate WARNING: Before starting assembly, verify this part is undamaged. If damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! Parts and Hardware for STEP 3 3/16 in.
- Página 19 3.1 Hang Your TV HANG ATTACH HEAVY! You may need assistance with this step. wall plate/arm assembly Press the bottom of the TV into the until Hang the TV/Bracket assembly onto wall plate/arm assembly you hear the lock click, securing the TV in place.
- Página 20 3.1 (continued) SECURELY TIGHTEN CAUTION: IMPORTANT: Avoid potential personal injury or property damage! For cable management: The cable holder and securement screw MUST be in place and Skip STEP 3 and proceed to SECTION 3.2 on PAGE 21. tightened, to securely fasten the TV to the wall plate/arm assembly Otherwise you MUST proceed with STEP 3 on the right.
- Página 21 3.2 Manage Cables WRAP CABLES SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! The cable holder and securement screw MUST be in place and tightened, to securely fasten the TV to the wall plate/arm assembly Slip your cables into cable sleeve Secure the cables and cable sleeve , with the cable holder and securement screw...
- Página 22 3.2 (continued) EXTEND ARMS POSITION CABLES IMPORTANT: Curve the cable sleeve into a coil shape as shown — TIP: to allow the cables to curl up when the TV is retracted. Pull the arms of wall plate/arm assembly to full extension, to leave Insert the free end of cable sleeve into the channels of wall...
- Página 23 3.3 Install Cover Strips INSTALL BOTTOM INSTALL TOP Secure the cables onto the bottom channel of wall plate/arm Install the top wall plate cover assembly , by snapping in the bottom wall plate cover...
- Página 24 Adjustments LEVEL Loosen leveling screw Level your TV, then tighten leveling screw...
- Página 25 TILT Your TV should adjust easily when moved, then stay in place. Adjust the tilt tension knob using knob tool if your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knob using knob tool to prevent unwanted movement.
- Página 26 REMOVING THE TV HEAVY ! You may need assistance with this step. Disconnect all cables from the TV. Remove the cable holder securement screw Pull down on the Release ring to release the TV. Carefully lift the TV from wall plate/ arm assembly...
- Página 27 Troubleshooting If you are uncertain about your hardware selection, contact Customer Service at 1-800-359-5520 TV Supplied TV supplied spacers Spacers : Use your TV supplied spacer/adapter for flat back TVs : Use your TV supplied spacer/adapter and spacer (AND for: you want your TV closer to the wall).
- Página 28 ¿Su televisor No. ¡Perfecto! (incluidos los 56,6 kg pesa accesorios) Sí. Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (125 lb) MÁS de 56,6 kg (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. (125 lb)? ¿De qué está...
- Página 29 Español ESTAMOS AQUÍ PARA AYUDAR ¿Quiere ver un video donde se muestra lo fácil que va a ser seguir estos pasos? SANUS.com/2525 Véalo ahora en: Acierte a la primera. HeightFinder™ le indica el lugar donde debe taladrar. SANUS.com/1172 Descúbralo en: Nuestros expertos en instalación de EE.
- Página 30 Español 1.1 Seleccione los tornillos del televisor PRECAUCIÓN: Compruebe el enrosque adecuado de la combinación tornillo/arandela/espaciador y los soportes del televisor. (PASO 1.3). Si el tornillo es DEMASIADO CORTO, no sostendrá el televisor. Si es DEMASIADO LARGO, el televisor se dañará. Determine qué...
- Página 31 COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación concreta de la placa mural, pruebe nuestra herramienta HeightFinder disponible en sanus.com [www.sanus.com/1172]. Coloque la plantilla de la placa mural a la altura que desee y ubique los orificios muescados sobre las líneas centrales del montante. Nivele y marque la ubicación de los orificios.
- Página 32 INSERTAR LOS ANCLAJES Español PRECAUCIÓN: Compruebe que los anclajes queden nivelados respecto a la superficie de hormigón. Retire la plantilla de la placa mural e introduzca cuatro anclajes RETIRAR LAS CUBIERTAS Retire las cubiertas de la placa mural apretando hacia abajo el borde superior mientras tira de la cubierta hacia delante. APRETAR CON FIRMEZA PRECAUCIÓN: Evite posibles lesiones físicas y daños materiales.
- Página 33 EXTENDER LOS BRAZOS Español Extienda completamente los brazos del conjunto del brazo/placa mural para dejar suficiente holgura y así evitar tirar de los cables al mover el televisor. COLOCAR LOS CABLES IMPORTANTE: Curve el manguito del cable en forma de espiral tal y como se muestra para que los cables se enrosquen cuando el televisor se retracte. Inserte el extremo libre del manguito del cable en los canales del conjunto del brazo/placa mural 3.3 Instale las tiras de recubrimiento...
- Página 34 Dimensions in. [mm] TV INTERFACE 27.56 700.0 15.75 7.87 200.0 20.10 510.6 0.43 11.0 32.2 WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - TILT RANGE 24.00 609.6 14.00 355.6 13.5 OPENING 13.59 8.98 12.19 OPENING 345.2 228.2 309.5 33.54 852.0 25°...
- Página 35 Register your new mount and tell us how you like it for a chance to win in our monthly sweepstakes. Entering is quick and easy. Visit SANUS.com/1234 and follow three simple steps for your chance to win. "Monthly Prize" sweepstakes rules and restrictions apply. Visit...
- Página 36 800-359-5520 • info@sanus.com • SANUS.com SANUS • 6436 City West Parkway • Eden Prarie, MN 55344 USA ©2016 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone. 6901-002608 01 All other brand names or marks are used for identification purposes and are trademarks of their respective owners.