Publicidad
STEP 2A
6
DRILL
4X
CAUTION:
Be sure you drill into the CENTER of the stud.
Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 ½ in. (8.9 cm).
14
(continued)
3 ½ in. (8.9 cm)
7/32 in.
(5.5 mm)
7
SECURELY TIGHTEN
15
17
4X
CAUTION:
Avoid potential personal injury or property damage!
17
All four lag bolts
MUST BE firmly tightened to prevent
unwanted movement of the wall plate
securely fastened to the wall before continuing on to the next step.
17
Install the four lag bolts
pulled flush against the wall plate
15
. Ensure the wall plate is
and firmly tighten until they are
15
.
Go to STEP 3 on PAGE 18.
Publicidad
