Publicidad
Idiomas disponibles
Idiomas disponibles
9.
CONNECT HOSES TO SENSOR CONTROL BOX:
Connect supply hoses (marked green) to inlet
fittings (marked green) at mixing valve on control
box. Note: the connection should be "hot to hot"
and "cold to cold". Connect the spout connection
hose to the discharge port of the control box and to
the Y adapter (red to red).
Green marker
10.
After installing faucet, remove aerator and flush
the faucet to remove any leftover debris.
Reinstall the aerator.
Red marker
Red marker
Hot
© 2009 Danze, Inc. All rights reserved.
Green marker
Cold
Green marker
9
10
Green marker
Hot
Publicidad
