Publicidad
Idiomas disponibles
Idiomas disponibles
To turn off the fan, touch
touch
.
Touch
to turn the lighting on. Touch
operates independently of the on/off sensor.
Off-Timer
Use Off-Timer to turn off the hood after a specified time. Use Off-Timer to filter the
fumes out of the air after cooking. The Off-Timer can be set to 5, 10 or 15 minutes.
Touch
to activate the Off-Timer at any time. The sensor will flash and the display
will show . Now use the
Touch
to confirm your Off-Timer setting (according to the above table). A flash-
ing dot will appear by the fan speed on the display and the
Touch
to deactivate the Off-Timer at any time — the dot by the fan speed and
will stop flashing.
The ozone generator
When this function is active, ozone is generated. Ozone has bactericidal, viricidal
and fungicidal properties, it destroys mites and germs. In addition, it removes and
neutralizes organic and inorganic odours and disinfects rooms. Thanks to ozone,
the odours of cooking and frying are removed faster and more effectively.
The ozone generator function can be used independently of the kitchen hood oper-
ation in the air extraction or the recirculation mode.
The ozone generator function is only available when the hood fan operates.
The ozone is emitted by the kitchen hood in regular cycles, programmed in such a
way that the ozone concentration does not exceed the permissible and safe doses,
ensuring full safety of use.
NOTE! Before using the ozone generator function for the first time, set the appro-
priate ozonation programme, adapted to the size of the room (for open kitchens,
the kitchen area with the directly connected room should be taken into account) to
avoid the risk of a high ozone concentration, which can be harmful to health.
In order to set the appropriate ozonation programme:
•
Touch
to activate the appliance and
•
Touch and hold the
number 1, 2 or 3, which will reflect the currently set programme.
•
Now use the
suitable for the room size:
34
repeatedly until fan speed is reduced to zero
and
sensors to select the Off-Timer delay:
Display indication
sensor for 8 seconds, and the display will show the
and
sensors to select the desired ozonation programme
again to turn the lighting off. The lighting
Delay time [min]
15
10
5
will be shown on the display.
, or
sensor will flash.
Publicidad
