Makita DUS158 Manual De Instrucciones página 13

1. Remove the battery prior to adding chemical liquid to the tank.
2. Remove the tank lid. Refer to Figure 7.
3. Measure the recommended liquid. The cup can be used to measure up to 200 ml ( 8 oz). Refer to Figure 8.
4. Carefully pour the liquid into the tank with measuring cup through the filling opening of the tank. You can also
dissolve chemical liquid in water completely in a separate container and then pour it into the tank.
Make sure that the tank filling strainer is in place. Refer to Figure 9.
5. Tighten the tank lid. Refer to Figure 10.
6. Rinse the measuring cup with clean water.
*Container is not included.
Figure 7
Figure 9
Figure 8
Figure 10
13 English