Publicidad
Idiomas disponibles
Idiomas disponibles
SOUND
PRESSURE
UNCERTAINTY
LEVEL
[dB(A)]
[dB(A)]
L
pA
LH16ES
86
LH18ENS
88
LH22N
82
LH22EN
82
Use ear protection!
Displayed emission values are comparative and are to be
employed for a provisional assessment of the operator's
risk exposure during the work period. Appropriate evaluation
of work period must also include tool's idle and stop periods.
These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories,
or if it does not undergo regular maintenance, emission values
can significantly increase during operations.
MAINTENANCE
All maintenance operations are carried out with the power
supply disconnected.
At the end of each work session, or when required, remove any
dust from the body of the tool using a jet of compressed air,
paying particular attention to the motor ventilation slots.
No other maintenance operations must be undertaken by
the user.
Maintenance and cleaning of the inner parts, like brushes,
ball bearings, gears etc. or others, must be carried out only
by an authorized customer-service workshop also available
on the website http://www.rupes.it under Service section. Use
exclusively original RUPES.
DISPOSAL (WEEE DIRECTIVE)
For EU countries only: According to the European
Directive on Waste from electrical and electronic
equipment and its implementation in conformity
with national standards, exhausted electrical equipment
must be collected separately, in order to be recycled in an
environmentally friendly way. The product, when it reaches
the end of its life, must not be dispersed in the environment
or thrown away as household waste. It must be disposed at
authorized recycling centres (contact your local authorities to
know where to dispose of the product according to the law).
The correct disposal of the product contributes to the health
and preservation of the environment.
Illegal disposal of the product will entail penalties against the
offenders.
VIBRATION LEVEL[m/s
SOUND
(polishing)
POWER
LEVEL
On 3 AXIS
K
L
a
wA
h
3
97
2,70
3
99
2,80
3
93
2,50
3
93
2,50
p
EU DECLARATION OF CONFORMITY
]
2
We declare on our responsibility that the represented tool is in
UNCERTAINTY
conformity with the Essential Requirements of Safety of the
K
following Directives:
1,30
2006/42/EC; 2014/30/EU; 2011/65/EU.
1,30
The tests have been carried out in accordance with the
1,20
European Harmonised Standar:
1,20
EN 60745-1: 2009 + A11: 2010
EN 60745-2-3: 2011 + A2: 2013 + A11: 2014 + A12: 2014
+ A13: 2015
EN 55014-1: 2017
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
EN IEC 63000: 2018
Technical file at:
RUPES SpA a socio Unico
Via Marconi, 3/A - Loc. Vermezzo
20071 Vermezzo con Zelo (MI) - Italy
Vermezzo con Zelo (MI), 01/12/2021
S.p.A. a socio unico
THE PRESIDENT
G. Valentini
9
Publicidad
