Publicidad
Idiomas disponibles
Idiomas disponibles
▪ Never put down the equipment before the rotary
accessory has completely stopped. The rotary
accessory may touch the surface, making you lose the
control of the angle grinder;
▪ Make sure that the ventilation slots are not clogged
while operating. Do not place any objects over the
slots;
▪ Accessories and workpiece may become too hot
during operation. Avoid touching them, they can
cause severe burns;
▪ Make sure that you don't damage the electrical
circuits, gas and water pipes when operating the
equipment. Any damage to these installations can
cause fire, explosion, electric shock or property
damage;
▪ Avoid using the angle grinder on surfaces coated with
paints containing lead or other materials harmful to
health. Any contact or inhalation of dust may cause
allergic reactions and / or breathing disorders. Wear
a mask and work with a dust extraction device if the
power tool allows so.
▪ Materials containing asbestos cannot be worked.
Asbestos is carcinogenic;
Maintenance and cleaning
Before performing cleaning, adjusting, accessories
changing, repairing and maintenance work, the power
cord must be unplugged from the socket.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Cleaning:
The power tool must be carefully cleaned after each
use.
Do not use aggressive cleaning products.
products
may
damage
compromising the safe operation of the power tool.
These
plastics
and
metals,
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official dealer.
Keep all nuts and screws well tightened in order to
ensure a safe operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned
immediately and correctly.
Use only VITO-approved tools for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the angle grinder. If in
doubt, if you lack knowledge or resources, you should
contact an official dealer.
Technical assistance
Your angle grinder should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts sourced directly from the manufacturer.
29
Publicidad
