ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length (without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar
length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
*1
•
When using 25AP saw chain, use with Sprocket 9 (optional accessory).
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Battery adapter
Portable power pack
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
with 90PX, 91PX
with 25AP
Number of teeth
Pitch
XCU03
350 mm
(14")
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
2 ENGLISH
XCU04
443 mm
(17-1/2")
D.C. 36 V
4.6 - 5.5 kg
(10.2 - 12.1 lbs)
400 mm
(16")
300 - 400 mm
(12 - 16")
250 mm
(10")
90PX
91PX
25AP
*1
6
3/8"
0 - 20 m/s
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
3
200 cm
BAP182
PDC01 / PDC1200