Manuales relacionados para Sanus BLL1
Resumen de contenidos para Sanus BLL1
- Página 1 THANK YOU FOR CHOOSING SANUS THE #1 TV MOUNT BRAND IN THE US. BLL 1 Instruction Manual Scan for easy install video...
- Página 2 TWO SIMPLE STEPS TO FINDING YOUR STUDS: Holding it vertically, lightly move the SANUS Pull apart the SANUS Magnetic Stud Finder to Step 1 Step 2 Magnetic Stud Finder up and down while expose the probing pin within.
- Página 3 BLL1 We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Lo haremos sin estrés Si tiene preguntas mientras realiza la instalación, llámenos. 1-800-359-5520 (Reino Unido: 0800-056-2853) Estamos listos para ayudarlo.
- Página 4 Does your TV weigh No — Perfect! (including accessories) 175 lb more than 175 lbs. Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (79.3 kg) (79.3 kg)? 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. Drywall...
- Página 5 Attach Brackets to TV STEP 1 Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 6 1.1 Select TV Screws 1.2 Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M5, M6, or M8) to use. Determine your preference for spacer configuration when attaching your TV bracket.
- Página 7 1.3 Attach TV Brackets Center the TV brackets over your TV hole pattern as shown. Be sure to use the same holes and that the brackets are level. NOTE: Loosen the adjustment screws on TV brackets to extend the mounting holes over your TV hole pattern. Standard Install using the spacer, TV screw and washer combination you selected for your TV.
- Página 8 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. NOTE: Not all hardware included will be used. Sanus Magnetic Stud Finder* Wall Plate...
- Página 9 Stud centers must be verified – not all walls have conventional 16 in. (406 mm) or 24 in. (610 mm) stud spacing Locate a nail/screw in the studs using the Sanus magnetic stud finder provided. Find the edges of the studs using the...
- Página 10 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 11 Remove the wall plate template Install the wall plate using four lag bolts . Firmly tighten all four lag bolts until they are pulled flush against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place.
- Página 12 Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
- Página 13 Remove the wall plate template and insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the wall plate using four lag bolts . Firmly tighten all four lag bolts until they are pulled flush against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place.
- Página 14 Attach TV to Wall Plate STEP 3 HEAVY ! You may need assistance with this step. Hook the TV brackets onto the wall plate NOTE: The TV brackets can be slid anywhere along the wall plate for optimal positioning of your TV. Rest the TV into place against the wall.
- Página 15 Manage Cables Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall until the kick stands fall into place. CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall.
- Página 16 Adjustments TV LATERAL SHIFT LEVEL HEAVY ! You may need assistance with this step. To level your TV, turn the level Slide the TV left or right along the adjustment screw on the top wall plate to reposition. of either TV bracket to raise or lower that respective side of the TV.
- Página 17 REMOVING THE TV HEAVY ! You may need assistance with this step. Disconnect all cables from the TV (see Manage Cables on PAGE 15). Pull the release cords on the TV brackets while gently pulling the bottom of the TV away from the wall. CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall.
- Página 18 Troubleshooting If you are uncertain about your hardware selection, TV Supplied contact Customer Service at 1-800-359-5520. TV supplied spacers Spacers : Use your TV supplied spacer for flat back TVs : Use your TV supplied spacer and spacer for: (AND you want your TV closer to the wall).
- Página 19 Features TV bracket expands to fi t TV hole patterns Level from 200 x 200 mm up adjustments to 700 x 400 mm create a worry-free installation Brackets adjust side to side within the wall plate for optimal positioning Locking mechanisms Kick Stands hold TV from wall to for added security create room to attach cables...
- Página 20 Dimensions in. [mm] TV INTERFACE 26.57 675.0 11.81 300.0 WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 24.00 609.6 2.47 0.91 16.00 62.8 406.4 23.1 5.00 127.0 1.57 40.0 4.45 113.0 6.30 160.0 11.30 287.0 2.82 71.7 13.33 338.7 20.42 518.7 22.59 573.8 27.34 694.5...
- Página 22 ¿Su televisor pesa más de 79,3 kg No — ¡Perfecto! 79,3 kg (175 lb), incluidos Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (175 lb) los accesorios? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿Tabiques ¿Hormigón...
- Página 23 ESPAÑOL PASO 1 Colocar las placas de sujeción en el televisor Ver página 5 Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Página 24 ESPAÑOL PASO 2 Fijar la placa mural a la pared Ver página 8 Piezas y elementos de sujeción para el PASO 2 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Página 25 Nivele la plantilla de la placa mural y fíjela con cinta adhesiva en el lugar. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante.
- Página 26 Nivele la plantilla de la placa mural y marque la ubicación de los orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro.
- Página 27 ESPAÑOL PASO 3 Fijar el televisor a la placa mural Ver página 14 ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Cuelgue las placas de sujeción en la placa mural NOTA: Las placas de sujeción del televisor se pueden deslizar hacia cualquier parte junto con la placa mural para lograr un posicionamiento óptimo de su televisor.
- Página 28 ESPAÑOL Ajustes Ver página 16 NIVEL Para nivelar su televisor, gire el tornillo de ajuste de nivel en la parte superior de alguna de las placas de sujeción para levantar o bajar el lado respectivo del televisor. DESPLAZAMIENTO LATERAL DEL TELEVISOR ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso.
- Página 29 ESPAÑOL . Use los separadores proporcionados con el televisor y los separadores Sanus para: • • televisores con dorso irregular o redondeado dejar un espacio adicional para cables PRECAUCIÓN: Verifique el enrosque adecuado del tornillo o del conjunto tornillo/separador. –...
- Página 30 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.
- Página 31 Learn ways to get the most out of your space. FACEBOOK.COM/SANUSSYSTEMS Find product updates and more. Learn installation tips, tricks and household know-hows. TWITTER.COM/SANUSSYSTEMS View step-by-step product videos to ease your install experiences. YOUTUBE.COM/SANUSSYSTEMS Find the latest news stories about your favorite SANUS products.
- Página 32 If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! ‘Monthly prize’...