Sanus BLL1 Manual De Instrucciones página 11

6. Remove the wall plate template
7. Install the wall plate
11
NOTE: Hold the wall plate
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
movement of the wall plate
Go to STEP 3 on PAGE 14.
6
10
10
.
using four lag bolts . Firmly tighten all four lag bolts
13
in place when tightening the first lag bolt
11
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
11
until they are pulled flush against the wall plate
13
to keep the plate from shifting out of place.
13
MUST BE firmly tightened to prevent unwanted
13
7
13
11
.
11
11