THOMSON MIC200IBT Manual Del Usuario página 24

Wireless Charger Function
Simply place your wireless charging device on the wireless charger area indicated on the top surface
and charging will begin on contact.
Output power is 9V
USB Charging
The USB port is designed for charging external devices, such as smart phones.
Output power is 5V
AUX Input Jack
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the Aux-In mode. 'Aux-In' will appear on the LCD
display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the AUX input jack.
4. Start playback from your personal player.
Phone Jack
1. Rotate the Volume to set a low volume
2. Insert the headphones into the phone jack.
Note the following information: Only use the power supplies listed below.
Specification:
Type
Power input
Speaker driver
Speaker output RMS
Peak Speaker
Power consumptions
USB charge output
wireless induction
Speaker frequency
1.1A
1A
Features
AC 230 V~ 50 Hz 0,3 A Bluetooth Version
3'' 5W,4Ω
2x5W
30W
25W
5V 1A
9V 1,1A (MAX)
50Hz-20KHz
Type
Pair name
Bluetooth frequency
Transmission distance
EIRP
FM frequency
Remote control source CR2025 Lithium 3.0V
S/N ratio
- EN 10 -
Features
5.0
MIC201IBT
2402-2480MHz
10m
-61.10dBm
88.8-108MHz
＞50dB