CHOPPING ATTACHMENT
THE CHOPPING BLADES HAVE VERY SHARP EDGES. TAKE CARE WHEN
HANDLING OR CLEANING THEM.
NEVER PLACE THE CHOPPING BLADE ASSEMBLY ON THE MOTOR BODY
BY ITSELF.
DO NOT OPERATE USING THE CHOPPING ATTACHMENT CONTINUOUSLY
FOR MORE THAN 30 SECONDS (20 SECONDS ON HARD FOOD) WITHOUT
GIVING IT A REST PERIOD OF ONE MINUTE. THE CHOPPING ATTACHMENT
IS NOT SUITABLE FOR PROCESSING HOT FOOD.
Position the chopping bowl on a dry flat surface close to the mains supply socket.
1. Place the chopping blade into the chopping bowl.
2. Add the ingredients to the chopping bowl.
3. Fit the chopping bowl lid to the chopping bowl.
4. Twist the lid to lock it to the chopping bowl. Ensure that the lid is correctly
assembled and securely locked in position.
5. Squeeze and hold the two buttons on the side of the motor together.
6. Line up the two cut outs (one on each side) on the chopping bowl lid and push
the motor unit and bowl lid together. Release the two buttons. Ensure that they
are correctly assembled and securely locked in position.
7. Press the ON button
the variable speed control. Use the TURBO button when processing tougher
ingredients. Your stick mixer will operate until the button is released.
WHISKING ATTACHMENT
DO NOT OPERATE USING THE WHISKING ATTACHMENT CONTINUOUSLY FOR
MORE THAN 2 MINUTES WITHOUT GIVING IT A REST PERIOD OF
ONE MINUTE.
Use the whisking attachment for beating eggs, mixing batter, ready-mix desserts, etc.
The stainless steel whisk can be removed from the whisk collar for cleaning. Assuming
the whisk has been removed from the whisk collar, assemble the whisking attachment
as follows:
1.
Squeeze and hold the two buttons on the side of the motor together. Line up the
two cut outs (one on each side) of the whisk collar with the buttons q. Release
the two buttons. Ensure that the motor unit and the whisk collar are correctly
assembled and securely locked in position.
2.
Push the whisk into the whisk collar until it clicks into place w.
3.
Holding the unit firmly in your hand, press the ON button
whisking speed using the variable speed control. Guide the whisk through the food,
moving it from side to side.
. You can adjust the speed of your stick mixer using
"I"
En g lish-5
. You can adjust the
"I"