Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING
This product requires assembly.
Carefully cut the box down the sides then remove the
machine and any accessories from the box. Make sure
that all items listed in the packing list are included.
NOTE: This machine is heavy and requires a minimum of
two people to lift. To avoid back injury, lift with your legs
and not your back.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the unit carefully to make sure no damage oc-
curred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
See Figure 2.
The following items are included with the generator:
Key
No.
Description
1
Wheels .................................................................2
2
Axle ......................................................................2
3
Washer .................................................................2
4
Lanyard and Handle Lock Pin .............................1
5
Bottle of Engine Lubricant ...................................1
6
Handle ................................................................1
7
Bolts ....................................................................2
8
Nuts ....................................................................2
Operator's Manual (not shown) ...........................1
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious per-
sonal injury.
WARNING:
Do not attempt to operate the generator until assembly
is complete. Failure to comply could result in possible
serious personal injury.
TOOLS NEEDED
See Figure 3.
The following tools (not included or drawn to scale) are
needed for assembly:
Socket Wrench (12 mm and 13 mm)
Combination Wrench (10 mm, 12 mm, 13 mm, and 14 mm)
NOTE: Do not put fuel or lubricant in the generator before
installing the wheels and handle.
INSTALLING THE WHEELS
See Figure 4.
Wheels are provided to assist in moving the generator to
the desired location.
Locate the axle, washer, and wheels.
Slide the axle through the hole in the center of the wheel
then slide the washer onto the axle.
Qty.
Lift the machine and slide the axle into the wheel mount-
ing hole in the machine base as shown.
Push the wheel into the hole until it clicks in place and is
secured properly.
Repeat the process on the other side to install second
wheel.
INSTALLING THE HANDLE
See Figures 5 - 6.
Slide the handle into bracket and secure in place using
bolts and nuts.
Attach the lanyard to the handle lock pin and the handle
as shown.
Insert the pin through the hole in the handle and the
generator frame to secure handle in place.
WARNING:
Do not attempt to lift the unit by the handle assembly. If
it is necessary to lift the generator, always grasp by the
frame. Use proper lifting techniques to avoid back injury.
Page 11 — English
Publicidad
