Descargar Imprimir esta página

Samsung DW80R2031US Manual Del Usuario página 13

Ocultar thumbs Ver también para DW80R2031US:

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING THE HEIGHT OF THE UPPER RACK
You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. With the upper rack set at the highest position, the lower rack can
accommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to
8 in. (20 cm) in diameter.
1.
To lower the upper rack by 2 in. (5 cm),
remove the upper rack as shown in
Removing the Upper Rac
Removing the Upper Rack
reinsert the rack so that the upper four
wheels on each side of the rack are above
and below the
guide rail. See th
illustration to the right
.
To raise the upper rack, remove the
2.
upper rack as shown i
n
Upper Rack
Upper Rac k
hen reinsert the
belo
w. T
rack so that the lower three wheels
on each side of the rack are above and
below the
guide rail. Se
e th e Upper position
illustration to the right.
We recommend adjusting the height of the
upper rack before loading dishes into the
CAUTION
rack. If you adjust the rack after loading
the dishes, you may damage the dishes.
REMOVING THE UPPER RACK
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front. See the illustrations below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
CAUTION
perform poorly.
Step 1.
belo
w. Then,
e
Lo
ower position
wer position
Removing
Removin
the
,
Step 2.
English - 13
Lower position
Upper position
Step 3.

Publicidad

loading

Este manual también es adecuado para:

Dw80r2031 serie