English
WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. Never use replacement parts
or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure whether
it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.
STANDARD ACCESSORIES
(1) Case (Molded plastic) (Code No. 337594) ...............1
(2) Side Handle (Code No. 330209)...............................1
(3) Stopper (Code No. 971786) .....................................1
(4) Hammer Grease A (Code No. 981840) ....................1
OPTIONAL ACCESSORIES.....sold
separately
For accessories in detail please call metabo HPT AT
1-800-59-TOOLS
1.
Through-hole drilling (Rotation + Hammering)
(1) Drill bit (SDS-max shank)
External dia.
Overall length
(340 mm)
5/8"
(16 mm)
(540 mm)
(340 mm)
3/4"
(19 mm)
(540 mm)
(320 mm)
7/8"
(22 mm)
20-15/32"
(520 mm)
(320 mm)
1"
(25 mm)
20-15/32"
(520 mm)
14-9/16"
(370 mm)
1-1/8"
(28 mm)
22-7/16"
(570 mm)
14
ACCESSORIES
Code No.
13-3/8"
313448
21-1/4"
313456
13-3/8"
313449
21-1/4"
313457
12-5/8"
313450
313458
12-5/8"
313451
313459
313452
313460
External dia.
Overall length
14-9/16"
(370 mm)
1-1/4"
(32 mm)
22-7/16"
(570 mm)
14-9/16"
(370 mm)
1-1/2"
(38 mm)
22-7/16"
(570 mm)
14-9/16"
(370 mm)
1-9/16"
(40 mm)
22-7/16"
(570 mm)
2.
Anchor hole drilling (Rotation + Hammering)
Adaptor for SDS-plus shank bit
(1) Drill Bit
(SDS-plus shank)
3.
Large-dia. hole boring (Rotation + Hammering)
(Guide plate)
Code No.
985388
955169
(2) Core bit
External dia.
2" (50 mm)
4-1/8" (105 mm)
Code No.
313453
313461
313454
313462
313455
313463
+
(2) Adaptor for SDS-plus
shank bit
(SDS max shank)
Code No. 313465
(1) Center pin
Code No.
955165
(3) Core bit shank
(SDS max shank)
Code No.
313467