Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the oven
Removing the Gliding rack
NOTE
You can install the Gliding rack in any rack positions except the highest (level 7)
and lowest (level 1) rack position in the oven.
42 English
•
With the Gliding rack in the "Closed"
position and the oven off and cool,
grasp the rack and frame and pull both
forward to remove.
CAUTION
Do not install the Gliding rack directly above
the Flat rack.
You will not be able to install it properly
and the rack could fall.
Using the divider
•
To use twin mode operation, insert the divider.
•
You cannot use the Self-Clean or Steam-Clean functions when the divider is
installed in the oven cavity.
•
Handle the divider with both hands.
•
Use oven gloves when inserting or removing the divider.
To Install the divider into the Oven Cavity
CAUTION
Range displays "-dC-"
•
Check the divider to see if it is installed correctly.
NOTE
You can store the divider into the storage drawer.
1.
Insert the divider into the 4th rack
position of the cavity.
2.
Push the divider in until its back end
rests against the back of the cavity.
Publicidad
