CASO DESIGN VR 190 advanced Manual De Instrucciones página 36

• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
15 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
15.1 Complete overview
1 control panel
2 + upper gasket + 9 lower gasket
3 sealing profile: which presses the bag against the sealing bar
4 locking hook
5 safety switch: With open lid the heating element will not work.
6 cover release button
7 air intake connected with the vacuum chamber and pump.
Do not cover this air intake during vacuuming and sealing of a bag.
For connection of vacuum hose for vacuuming of canisters
8 vacuum chamber
10 sealing bar and teflon tape: Contains a heating wire covered with Teflon which allows
the bag to seal but not to stick to the sealing bar.
36