Publicidad
Idiomas disponibles
Idiomas disponibles
10.2
INSTALL THE TUBE
1. Align the grooves (6) on the tube with tabs (7) on the
machine housing.
2. Install the tube onto the blower housing until the tabs
engage the grooves.
7
6
3. Turn the tube in the direction of the arrow until the two
tabs lock into the positions.
10.3
INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the engine stops before
you install or remove the battery pack.
•
Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
10.4
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
English
11
OPERATION
Make sure the blower tube is in position before operation.
11.1
START THE MACHINE
1. Push the On/off button (4).
2. Pull the trigger (2) to start the machine.
5
11.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
11.3
SPEED BUTTON
1. Make sure that blower is on. The LED above the On/off
button is on.
2. Push the speed button to adjust the air velocity.
11.4
OPERATION TIPS
•
Blow around the outer edge of the unwanted materials to
prevent the unwanted materials from scattering.
•
Use rakes and brooms to clear the unwanted material
before you blow.
•
Make the surfaces wet before you clear the unwanted
material in dusty conditions.
•
Look out for children, pets, open windows, and cleaned
cars during operation.
•
Clean the machine.
•
Discard the unwanted material when you complete work.
12
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
7
WARNING
1
3
2
4
NOTE
CAUTION
CAUTION
EN
Publicidad
