Publicidad
Idiomas disponibles
Idiomas disponibles
7.2 STOW THE MACHINE
• Remove the battery pack before you store the charger or disconnect the
charger.
8. TROUBLESHOOTING
PROBLEM
Charger doesn't
work. Charger shows
defective mode. (LED
flashes Red)
Charger doesn't
work. Charger shows
evaluation mode (LED
indicates Red solid
ON).
9. TECHNICAL DATA (BATTERY CHARGER)
Model
2900802
Voltage 40 V
Input
120V AC 50/60Hz, 0.6A
Max
Output
40V DC 0.5A
Model
29482/CAF806
Voltage 40 V
Input
120V AC 50/60Hz, 2.5A
Max
Output
40V DC 2A
Model
CAF814
Voltage 40 V
POSSIBLE CAUSE
Battery pack or
charger is defective
or there is a bad
connection between
the battery pack and
charger.
Battery pack is either
too hot, or too cold.
9
SOLUTION
Try to remove and reinsert the
battery pack in the charger.
Try charging a different battery
pack.
Unplug the charger and wait
until the red LED goes out,
then reconnect the plug to the
power supply.
Allow the battery pack to reach
normal temperature. Charging
will begin when the battery
pack returns to 3°C-47°C
(37°F-117°F).
Input
120V AC 50/60Hz, 2.5A
Max
Output
40V DC 2A
Model
29492
Voltage 40 V
Input
100-120V AC 50/60Hz,
2.6A Max
Output
40V DC 4A
Model
CAF826
Voltage 40 V
Input
120V AC 50/60Hz, 3A Max
Output
40V DC 4A
EN
Publicidad
