Publicidad
¾"
Tools Required / Outiles Utiles /
Herramientas Útiles
2
1⅝"
1¼"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thor-
oughly before beginning installation.
Make sure that you have all tools and supplies
needed to complete the installation.
• Each bodyspray requires a ½" NPT brass nipple,
recessed ⅜" behind the surface of the finished
wall (see page 6).
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.4 GPM
Publicidad
