Publicidad
Idiomas disponibles
Idiomas disponibles
Step 1:
Step 3:
Step 5:
corner of
Shelter
Step 7:
anchor
Remove assembly
from portable, wheeled
storage bag. Grab corner
legs in each hand. Lift
frame slightly off ground.
Stepping backwards, pull
frame apart until your
arms are fully extended.
Do not place hands
between frame tubes.
Push up until canopy is
fully opened.
Pull corners down snug,
attaching hook and loop
fasteners. Secure cover
fasteners around top
roof frame.
cover
faStener
For temporary anchoring of canopy on grass, dirt or packed
soil, insert temporary spike anchors through corner feet.
CAUTION:
for permanent installation. Never leave canopy unattended.
For all PRO SERIES
square and straight when temporary spike anchors are
inserted through corner feet.
For assembly questions, Please call Customer Support:
1-800-524-9970 or in CANADA: 1-800-559-6175
Step 2:
Step 4:
pin
Step 6:
Temporary spike anchors are NOT designed
straight leg Pop-Ups, legs should be
™
Page 3
Unfold cover. Place
cover over frame.
Align corner pockets
of cover over frame
legs.
Slide corner brackets
up until button snaps
into place. Align roof
supports at joint and
insert stabilizer pins.
Shown
without
cover
for
clarity
Slide legs to desired
height, making sure
buttons snap into place.
05-22538-22539-22540-22541-
22542-22543-22587-22887-0A
Publicidad
