Nikon PC-E Micro NIKKOR 45mm f/2.8D ED Manual Del Usuario página 28

• Set the aperture with the lens' aperture ring even on a
camera that requires aperture to be set via its command
dial. With a camera that has the custom setting menu
"aperture setting with lens' aperture ring," this setting
En
is not required.
Determining exposure (with an external exposure
meter)
a Set the shift and tilt amount to 0 by rotating the shift
and tilt knobs. (Fig. 2)
b Set the camera's exposure mode to M.
c Set the desired aperture using either the lens aperture
ring or the camera's command dial, input the aperture
value on the camera's LCD panel to the external exposure
meter to determine exposure, and set the shutter speed.
If you cannot read the aperture value on the camera's
LCD panel or cannot determine exposure because the
camera does not have an LCD panel, choose a shutter
speed appropriate for the f-number (p. 254). With this
lens, the brightness of the image on the film (image
sensing device) will decrease by 1 stop and the effective
f-number will increase by 1 stop at the closest focusing
distance.
• When using a camera other than the D4, D3-Series,
D800-Series, D700, D300-Series, D90, D7000, D5100,
D5000, D3200, D3100 or D3000, set the aperture with the
lens' aperture ring even on a camera that requires aperture
to be set via its command dial. With a camera that has the
custom setting menu "aperture setting with lens' aperture
ring," this setting is not required.
28