Publicidad
Idiomas disponibles
Idiomas disponibles
Operation Instruction
Riding method
Be familiar with all the spare parts of the E-bike and test all the electric functions
before riding. Make sure all the spare parts for the bicycle are in good condition, such
as battery power, and tire pressure. The detailed operation is as follows:
Start-up
Insert the key into power switch at the right side of battery box,
turn to "ON" position, if the power display lights on, then power supply is normal.
1. Start-up by accelerator: turn the accelerator towards you (counter-clockwise) and
the rotation angle should be from small to large to start, then you can adjust speed
by turning the accelerator slowly, The speed can increase to 20km/hour, but the
actual speed depends on weight, road surface, tire pressure and other factors.
2. Start-up by pedal assistance: After turning on the power, you can also use your
pedals to start-up the E-bike, then you can control your speed with accelerator, as
well as by pedaling the bicycle faster. But please do not pedal too hard, in case it may
damage the components of e-bike since it is mainly motor driven.
Riding safely
Riding attention on the road
1,Speed should be increased slowly after start-up, in order not to waste energy and
damage electrical components, it is much better start-up with pedal assistance.
2,Please ride with the pedal assistance when climbing hills or steep terrain, in order
to prolong the service life of battery and the motor.
1). While staying safe, try to reduce frequent braking and start-up while riding, in order
to save energy.
2). To stop the E-bike, you can release the accelerator by turning clockwise, the speed
will slow down and stop.
3). Do not use the accelerator and brake together while riding, you can release the
accelerator first, and then brake. In order to not overload motor or damage other
E-bike's components.
8
YOU-RIDE AMSTERDAM
Publicidad
