Operation Instruction
Please read and understand these instructions completely before operating your
E-bike to prevent serious injury to yourself and others, and to prevent damage to
your E-bike.
IMPORTANT NOTICES
• Always recharge the battery immediately after each use. Failure to do so may
damage the battery.
• The charger can remain plugged-in for trickle-charge purposes during long periods
of storage.
• For storage periods over 1 month, the battery should be checked and fully recharged
before riding.
Helmets:
Always wear a properly fitted helmet which covers the forehead when riding an E-BIKE.
Many states require specific safety devices. It's your responsibility to familiarize
yourself with the laws of the state where you ride and to comply with all applicable
laws, including properly equipping yourself and your bike as the law requires.
It's strongly advised that a properly fitted E-bicycle
ke
safety helmet be worn at all times when riding
your E-bicycle.
The correct helmet should:
- Be comfortable
- Be lightweight
- Have good ventilation
- Fit correctly
- Cover forehead
Reflectors
Reflectors are important safety devices which are designed as an integral part of your
E-bike. Federal regulations require every bicycle to be equipped with front, rear wheel
and pedal reflectors. These reflectors are designed to pick up and reflect street lights
and car lights in a way that helps you be seen and recognized as a moving bicyclist.
Checking reflectors and their mounting brackets regularly to make sure they are
clean, straight, unbroken and securely mounted. ,Replace damaged reflectors and
straighten or tighten any that are bent or loose.
Your E-bike is supplied with one front, one rear wheel reflector,and four pedals
reflectors. These are important safety and legal requirements, and should remain
securely fitted and in good, clean condition at all times. Periodically inspect all
reflectors, brackets and mounting hardware for signs of wear or damage. Replace
immediately if damange is found.
ENGLISH
7