KNOW YOUR PRESSURE WASHER
The safe use of this product requires an understanding of the information on the tool and in this
operator's manual, as well as a knowledge of the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety rules.
(See Figure 2.)
Trigger Handle
Handle
Trigger with Lock-out
High Pressure Hose
ON/OFF Switch
CFCI
Spray Tip
Water Intake
Turbo Nozzle
Wheel
Water Outlet
Detergent Tank
Fig. 2
dETERGENT TANK
Remove the cap from the detergent tank to add detergent to the pressure washer.
GFCI PLUG
The pressure washer is equipped with a GFCI plug to guard against the hazards of ground fault
currents. This plug does not protect against short circuits, overloads, or shocks.
HIGH PRESSURE HOSE STORAGE
Once the high pressure hose is rolled, hang it on the top of the machine using the hook-and-loop strap
to secure in place.
ON / OFF SWITCH
This switch turns the pressure washer on and off.
TRIGGER HANdLE
The trigger handle has a gripping surface that provides added control of the spray wand and helps
reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out provides
protection against accidental start up.
WATER INTAKE
Attach the garden hose to the water intake.
WATER OUTLET
Attach the High Pressure Hose to the water outlet.
EN - 10