Descargar Imprimir esta página

GreenWorks GPW 1600 Manual Del Operador página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

CHANGING THE SPRAY TIP
W A R N I N G
NEVER change spray tips without engaging the lock-out on the trigger handle and NEVER point the
wand at your face or at others. The quick-connect feature contains small springs that could eject the
spray tip with some force. Failure to heed this may cause personal injury.
■ Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
■ Engage the lock-out on the trigger handle by pushing the trigger lock button to the right.
■ Pull back the quick-connect collar on the spray wand.
■ Push the spray tip into place in the spray wand .
■ Push the collar forward so that the spray tip is secured properly . Check to see that the spray tip is
secure.
Spray Tip
1
Spray Wand
SPRAY TIP
White - Wide fan tip (40° )
■ The white 40 degree tip, referred to as the "fan" tip creates the widest area of
40
O
Turbo Nozzle Tip
■ The nozzle rotates in a zero to 15 degree spray pattern in a circular motion to
(See Figure 10.)
2
3
cleaning with relatively low pressure. This pressure washer tip is best used for
light or delicate cleaning applications. It is recommended for light cleaning on
wood decks and other soft or delicate surfaces.
break down tough dirt and grime. The spray pattern can cover area of 4 to 8
inches wide, depending on a distance between the tip and the surface being
cleaned.
OPERATION
1-Pull back the quick-connect collar
2-Push the spray tip into place
3-Push the collar forward
Fig. 10
APPLICATION
EN - 19

Publicidad

loading