Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. Close the side discharge door.
7.7
SET THE CUTTING HEIGHT
The machine can be set to different cutting height.
1. Pull the height adjustment lever (7) rearward to increase
the cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
7.8
INSTALL THE BATTERY PACKS
THIS MOWER MUST HAVE TWO BATTERIES TO RUN!
29
10
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the engine stops before
you install or remove the battery pack.
•
Read, know, and follow the instructions in the battery
and charger manual.
The machine has an automatic switch function that lets the
other two battery packs work when the first two battery
packs are depleted.
7
8
28
30
WARNING
NOTE
English
Optimize the power and performance of your new 2x24
mower by running with both batteries charged to 100%.
1. Open the battery door A (8).
2. Align the ribs on the battery pack (28) with the grooves in
the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door A.
6. Follow the same operations to install the battery packs in
the other compartment.
The motor starts only when you put in the safety key (30).
7.9
REMOVE THE BATTERY PACKS
1. Open the battery door A (8) or battery door B (10).
2. Remove the safety key (30).
3. Push and hold the battery release button (29).
4. Remove the battery packs from the machine.
8
OPERATION
Wear eye protection during operation.
8.1
START THE MACHINE
23
1. Make sure safety key is inserted into slot.
2. Push and hold the start button (1).
3. While you hold the start button, grab the start handle (2)
in the direction of the handle bar.
4. Once the machine has started, you can release the start
button.
5. Press Turbo button (24) to speed up to 3200 RPM.
Battery capacity indicator (23)
10
IMPORTANT
NOTE
WARNING
24
2
Publicidad
