Publicidad
Idiomas disponibles
Idiomas disponibles
LED light
- A fixed red indicator light indicates that the driver is charging.
When the red indicator is off, it indicates that the charging is complete or
the base is not connected.
When the red indicator blinks, it indicates that the battery is no power or
the battery is not properly installed.
- The green indicator indicates that the wireless connection is correct.
- The blinking blue indicator indicates the pairing status of the 2.4g con-
nection mode.
- The blue and green lights flicker alternately to indicate the pairing state
of the Bluetooth HID mode.
- Blinking green indicate the barcode scanner is in The bluetooth SPP/
BLE pairing state.
Buzzer
- Long volume (from low to high): indicates that the scanner is on.
- Long volume (from high to low): indicates that the player is close.
- Short volume (low frequency): indicates that the barcode is read or that
the pairing or wireless connection is successful.
- Short volume (from low to high): indicates that digital data has been
recorded or that installation code has been scanned.
- Three short volume (low frequency): indicates that the wireless trans-
mission fails or the storage is full and scanning is stopped.
- Short volume (low frequency): indicates battery has no power.
- Two short volume (low frequency): indicates that the wireless is dis-
connected.
- Two short volume(high frequency): indicates that scan configuration
code does not work.
Common problem
If I can't connect the scanner to my Android Bluetooth phone, what
should I do?
Make sure that the phone is Android 3.0 or higher and can connect directly.
Why can't I load the barcode to my computer or phone after pairing?
A. Make sure that if the pairing is successful, the scanner's LED light will
be green.
B. If counting function is open, the barcode is not automatically loaded
into inventory mode. You must manually scan the corresponding barcode.
If computer or phone can't find the scanner's Bluetooth? What can I do?
A. Ensure that the selected communication mode is Bluetooth HID. Other
communication methods require relevant testing tools, please contact the
21
Publicidad
