Manuales relacionados para Truper PIPI-401
Resumen de contenidos para Truper PIPI-401
- Página 1 Manual Gravity feed 30 PSI - 50 PSI spray gun Air Pressure Applies for: Code Model 101855 PIPI-401 101856 PIPI-402 101857 PIPI-403 Read the user’s manual thoroughly CAUTION before operating this tool.
- Página 2 Keep this manual for future references. Preparation The illustrations in this manual are for reference Start Up only. They might be different from the real tool. Maintenance Troubleshooting Technical Data PIPI-401 PIPI-402 PIPI-403 Code 101855 101856 101857 Description Gravity feed spray gun Jar Capacity 13.5 oz...
- Página 3 Safety Warnings for the Use of Pneumatic Tools Keep your work area clean, tidy and well lit. Use adequate personal protection. CAUTION CAUTION Cluttered and dark areas may cause accidents. Using safety glasses, anti-dust mask, safety non-skid shoes, helmet and earplugs used in adequate conditions Never use the tool in explosive environments considerably reduce the risk of injury.
- Página 4 Safety Warnings for the Use of Gravity feed spray guns Substances and Materials While operating the device CAUTION • The unit is designed to apply covering CAUTION • Never point the sprayer towards your materials like paint, varnish, enamel, etc. These should body, passersby or animals.
- Página 5 Parts Paint Flow Regulating Screw Fan Regulating Screw Jar to Gun Connection Hook Grip Liquid nozzle Sprayer (Nozzle) Trigger Air Flow Air Inlet Regulating Screw ENGLISH...
- Página 6 Preparation • Preparing the surface to be sprayed is important to carry out a good job. Thin the paint or product to gain the right viscosity before applying. • Double check always the surface to be sprayed is free of dust, dirt or grease. •...
- Página 7 Start Up Adjusts Turning on CAUTION • During the adjusting process and • Turn on the compressor. before applying the paint onto the work surface make • Press the trigger (E) to open the air flow and start some tests on scrap material until gaining the adequate suctioning the product from the jar.
- Página 8 Maintenance Cleansing and Care • It is very important to clean the paint gun thoroughly after each use. WARNING Inadequate cleansing will result in malfunctioning and will cancel the Warranty. • Without removing the jar press the trigger to remove all the product inside the system.
- Página 9 Troubleshooting Right Mist Pattern Problem Cause Solution Wrong Spraying Pattern: • Remove the obstructions from the nozzle. CAUTION Do not use metal objects • Paint build up in the nozzle. to clean the funnel orifices. • Half Moon • Remove the obstructions from the nozzle •...
- Página 10 Notes ENGLISH...