Descargar Imprimir esta página

Sharp CD-BK143V Manual De Manejo página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

„ Recording from the radio
1
Tune in to the desired station. (See page 25.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE
[
(TAPE)] button.
Recording will be paused.
4
Press the
/
(
/SELECT/RE-
SUME) button to start recording.
To interrupt recording:
Press the REC PAUSE
[
(TAPE)] button.
To resume recording, press the
/
(
/SELECT/RESUME) button.
To stop recording:
Press the
( /RETURN) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
z When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.
z To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.
All manuals and user guides at all-guides.com
„ Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal or CrO tapes.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into
the TAPE 1 cassette compart-
ment. Insert a blank tape into the
TAPE 2 cassette compartment.
It is recommended that the recording
tape is the same length as the master
tape.
3
Press the TAPE (1
til "TAPE 1" appears on the dis-
play.
4
Press the REC PAUSE
(TAPE)] button.
Recording will be paused.
5
Press the
SUME) button to start dubbing.
To stop dubbing:
Side A
Press the
TAPE 1 and TAPE 2 will simultaneously stop.
„ Erasing recorded tapes
Tab for side B
Tab for side A
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
2
Press the TAPE (1
3
Press the REC PAUSE
4
Press the
Note:
Make sure that the TAPE 1 is not in use.
2) button un-
[
/
(
/SELECT/RE-
( /RETURN) button.
2) button until "TAPE 2" appears on the display.
[
(TAPE)] button.
/
(
/SELECT/RESUME) button to start erasing.
Listening to the radio (See page 25.)
01/8/28
CD-BK143V(X)E3.fm
CD-BK143V
ENGLISH
E-30

Publicidad

loading